Kaisercraft - Factory 42 - Part 2

Hi! Lynn here today - with my second post using the versitile Factory 42 collection from Kaisercraft. My first post used just the 6.5" x 6.5" Paper Pad, this time I have made a layout and used some 12" x 12" paper and some stickers, together with more from the paper pad (details below).

 

This photo of my Dad was taken in his darkroom developing photographs of Mum. Probably late in the 1950's. Not a brilliant photograph but well worth preserving this memory in my scrapbook. I can remember this room from my early years, and in 1968 it was turned into a bedroom for my baby brother!

 The paper I chose for the base of this layout is called Machine, and I used the reverse side, with the bluish-grey hezagon pattern. I mounted the photo onto a another image the same but slightly larger. The two photos were mounted onto some gold matt cardstock. 

 

I used a sheet of paper from the 6.5" x 6.5" paper pad to display the photos as this was grey in colour and had some gogs along the sides.

Using Sizzix Thinlits, Tim Holtz, Alterations, Gearhead dies I cut a lot of cogs - I used cardstock and all 22 dies in the set twice! Then all the diecuts were heat embossed with a selection of embossing powders and enamels in metalic colours. This meant I had plenty to select from and more to use on another occasion. I used the large corner dies made up of many cogs in to opposite corners of the paper pad paper.

  Two large kraft Tags (Ranger Inkssentials #8), were tucked behind the mounted photo.  I did a little doodling and inked the egdes of these first. I also used them for a little journalling.

As photography was my theme I used some Kaisercraft acetate filmstrips from the Keepsake collection.  

 Other items used are:
Twine
Distress Inks in various colours
The Sticker Sheet from the Kaisercraft Factory 42 collection

Metal Key embellishments from my stash.

Papermaze have put together a Bazzill Plain Matchmaker pack of five sheets of cardstock in co-ordinating colours to go with this collection.

This collection also works well with several other Kaisercraft collections:
Barber Shoppe
Just Landed
Base Coat
&
Antique Bazaar

I will be back with some male cards using the paper pad next month.
Thanks for looking
Lynn x

Kaisercraft - Factory 42

Hi there - Lynn with you today, to show you what I made when I had the chance to play with a Kaisercraft paper pad from the new, Factory 42 line. It is an excellent collection for making cards and layouts for the special men and boys in your life. 

I have many of my larger dies stored on magnetic sheets in plastic storage boxes, having been removed from their original packaging. However I feel the intricate sets of Sizzix Thinlits Alterations dies need a different method of storage. They have many small pieces and would easily become separated and possibly lost if removed from their packaging. The manufacturing packaging consists of strong plastic wallets, and I find it uesful to keep the dies with their images, showing what is inside the set. I was therefore trying to think of a way to store a group of these die sets together.

I came up with this file which has a box inside and will hold up to seven sets of dies. It will hold my more masculine dies and I plan to make another in the same way for my floral dies using different papers.

Find this paper pad HERE

These paper pads are very versitile as you have two sheets of each design as well as die cuts and foiled papers. In fact the papers in these pads are 6 1/2" square, giving you a little more paper to play with, and thus I was able to make this project without having to join papers. 

Back in May this year I made a mini album (cook book), and today's project uses some of the same principles, for joining the chipboard and attaching the magnets (so I won't go over all that again - I will simply add the link here). The chipboard you will need to cut for this project is listed below and shown in the photo.

Front and back pieces (2 the same) - 14.5 cm x 17 cm
Spine - 4.5 cm x 17 cm
Small box front - 6cm x 14 cm
Small box back - 7 cm x 14 cm
Small box sides (2 the same - remember to flip one over so they are a mirror image of one another) - 4 cm wide, height of 6 cm at the front and 7 cm at the pack of piece (see photo)
Small box base - 4 cm x 14 cm

Build the small box and the folder using black duck tape as explained here. The duck tape makes the joints strong and flexible, while giving the edges some water resistance too.

Attach the magnets at this point so they are hidden under the decorative paper see next two photos for positions. For technique used to attach magnets, please see here. 

The first photo shows position of 4 pairs of magnets to attach back of small box to inside back of folder...

 ... the second photo shows position of another 2 pairs of magnets to close the folder (left of inside front of folder to right front of small box).

Now for the fun part - decorating the box!

I selected the papers from the pad, then cut them so the measurements were about 0.5 cm smaller than the chipboard. The edges were inked with Distress Inks (weathered wood and gathered twigs).

Here is the inside of the folder ...

... and the outside - for this I used the foiled papers.

For the small box I covered all four sides with the cog paper:

Lastly I used black Bazzill cardstock and papers from the pad, together with several dies to add some embellishments and lettering to the outside of the folder. 
I used Thinlits Die Set Gearhead, Bigz Die Pipeline, Sizzlits Decorative Strips - Wanted Alphabet and Typeset Alphabet. I embossed the cogs with several different metalic coloured embossing powders. A little Glossy Accents was added to the water drips.

Now to make the next one - I think they should look good on the shelf in the craft room!
Thanks for looking.
Lynn x